TRABOLD |
Filter grade 10 |
Filter grade 20 |
Filter grade 30 |
| Internal combustion engines |
up to 16 l (4 gls) oil volume | 16-40 l (4 -11 gls) oil volume | above 30 l (8 gls) oil volume |
| Hydraulics systems | up to 120 l (31.7 gls) | 120-500 l (31-130 gls), above this range types 20 connected parallelly |
|
| Oil heaters | up to 4 l (1gl)/min | up to 6 l (1.5 gl)/min | up to 8 l (2 gls)/min |
| Sizes of the filter case (without junction) | 130 mm length/about 120 mm | 230 mm length/about 120 mm | 330 mm length/about 120 mm |
| Sizes of the filter cartridge | 100 mm length/about 80 mm | 200 mm length/about 80 mm | 300 mm length/about 80 mm |
| Weight | 1600 g | 2500 g | 3450 g |
| Filter throughput | 1 - 5 l/min, depending on the oil viscosity | 2 - 6 l/min, depending on the oil viscosity | 2 - 6 l/min, depending on the oil viscosity |
| Oil consumption | about 0.4 l (0.1gl) | about 0.8 l (0.2gl) | about 1.2 l (0.3gl) |
Schindler elevator for filtering hydraulic oil
Material of the case |
Continuously extruded casting; excellent quality oxidized aluminum, Viton sealing |
|
Material/design of filter cartridge |
Helically wound filter paper (cellulose) around central sleeve |
|
Mounting |
Engine: shunt circuit |
|
Filter functions |
Physical cleaning of the oil and its simultaneous cooling through the case cooler fins |
|
Filtering performance
No 1101/13535/36 |
Water absorption, high filtering power of solid particles down to 0.1 m m; medium range: 1 m m. TRABOLD filter corresponds to the prescriptions of the ISO/DIS 4406 NORM 11/8. standard. Achieving this qualification, the filter can operate at a cleaner output of the average commercial quality. The water take-up capacity of the grade10 filter cartridge under operational conditions is 60 - 100 g. The water absorption of larger filters varies in proportion with the volume. |
|
Mode of filtering |
High-power filtering with radial and axial mode; both flow directions combined; using the whole filter cartridge, the filter volume is minimized. |
|
Inlet pressure |
Minimum pressure = 0.5 bar, maximum pressure - filter cartridge is compressed only slightly even at 400 bar. Filter case can be loaded steadily up to 20 bar, and max. 30 bar pressure peaks are allowed. |
|
Pressure reduction in engine |
According to tests, the pressure in the engine does not decrease because the oil pump has adequate reserve capacity. |
|
Changing the filter cartridge |
In engines: every 10,000 - 30,000 miles, or equivalent operation time; in hydraulic or oil-heater systems: with a frequency depending on the equipment and contamination. |
|
Time of filter cartridge change |
5 - 10 minutes. |
|